FP PostBase Vision - Tips for Troubleshooting

PostBase Vision
6
15 Ordering consumables _______________________________________ 119
15.1 Placing an order ______________________________________ 119
15.2 Displaying order status _________________________________ 120
15.3 Displaying address data ________________________________ 120
16 Maintenance and care ________________________________________ 121
16.1 Cleaning the housing ___________________________________ 121
16.2 Cleaning the sensors ___________________________________ 122
16.3 Cleaning the print system _______________________________ 125
16.3.1 Starting automatic print system cleaning ____________________ 125
16.3.2 Cleaning ink cartridge by hand ___________________________ 126
16.4 Test Imprint – Check print quality _________________________ 128
16.5 Print system: show ink level _____________________________ 129
16.6 Changing the ink cartridge ______________________________ 130
16.7 Replacing the transport brush ____________________________ 134
16.8 Calibrating the touch screen _____________________________ 136
16.9 PostBase Vision Feeder (optional) __________________________ 137
16.9.1 Filling with sealing liquid ________________________________ 137
16.9.2 Adjust moistening level _________________________________ 140
16.9.3 Cleaning / changing the moistening sponge _________________ 141
16.9.4 Cleaning / changing the moistening brush __________________ 145
16.10 Sealer (optional) ________________________________________ 147
16.10.1 Cleaning ____________________________________________ 147
16.10.2 Checking the liquid level and filling with sealing liquid _________ 148
16.10.3 Replacing felts ________________________________________ 149
17 Tips for troubleshooting ______________________________________ 152
17.1 Error messages _______________________________________ 152
17.2 Possible causes and remedy ____________________________ 152
17.3 Remedying a letter jam _________________________________ 163
17.4 Inserting the letter guide at the ramp (PostBase Vision Feeder) ______ 165
17.5 Correcting the moistening felt position on the rocker (Sealer) _____ 166
17.6 Removing / inserting the security device ____________________ 167
17.7 Manually moving the ink cartridge to the exchange position _____ 169
18 Decommissioning and disposing of the mailing system ____________ 172