32
Rev 4/2018
Seat Belts
Seat belts are standard equipment on both the
operator and instructional seats. The lap type seat
belts have push button quick release and auto-
matic belt retraction to allow unrestricted exiting
and entering of the seats (see Figure 37).
CAUTION
Inspect the seat belt and mounting hardware
on your machine at least once a year. If the
seat belt system, including the mounting
hardware, buckle, belt or retractor, shows
any sign of damage such as cuts, fraying,
extreme or unusual wear, discoloration or
abrasion, the entire seat belt system should
be replaced immediately. For your safety,
replace the belt system only with replace-
ment parts approved for your machine (see
parts manual).
Figure 37. Seat Belt
To Next Page
Loading...