EasyManua.ls Logo

Freeman 280 - Pre Starting Checks

Freeman 280
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev 4/2018
47
A. Dipstick
A
Figure 56. Engine Oil Dip Stick
1. Before starting the engine check the engine
oil level (see Figure 56). Do not operate the
engine when oil level is below the low mark
on dipstick (A).
IMPORTANT! Do not operate the engine
when coolant level is below the COLD mark
on the overflow tank.
Pre Starting Checks
A. Coolant Reservoir
A
Figure 57. Coolant Overflow Tank
(tank may vary between models)
2. Check coolant level (A). It must be visible in
the overflow tank between the HOT and COLD
marks (see Figure 57).
3. Be sure baler has plenty of fuel. Do not allow a
diesel engine to run out of fuel (see Figure 58).
FUEL
Figure 58. Fuel Gauge

Table of Contents