Freeman 280 - Bale Count Screen

Rev 4/2018
35
Figure 40. Bale Count Screen
Bale Count Screen
The system has two bale counters; Bale Count,
which can be reset by the operator at any time,
and Lifetime Bales, which can only be reset by a
Freeman Service representative.
1. RESET BALE COUNT Press and
hold F1 to reset Bale Count.
2. Lifetime Baling Hrs Measures the time that the key
is in the on position and the flywheel is turning.
3. Lifetime Hrs Measures the time that the key is
in the on position, whether or not the flywheel is
turning.
4. Lifetime Bales This counter can only be reset by
a Freeman Service representative.
5. Bale Count Displays the number of bales made
since the bale counter was last reset (see Item #1
for how to reset the counter).
1
5
2
3
4