86
Rev 4/2018
Motorized Hay Saver Wheel Option (if
applicable)
The motorized hay saver wheel is automatically
controlled, and it will rotate at a constant speed
whenever operation of the baler is selected. When
the baler is operating, the hay saver wheel will be
rotating at a set constant speed, and continue at
that speed whether the pickup is raised or lowered.
When raising or lowering the pickup assembly,
the operator will notice the wheel will stop rotating
while the pickup is being positioned, and then it will
start rotating again once the pickup height is set.
The nominal operating speed of the motorized hay
saver wheel is factory set at 50 RPM. A manual
speed adjustment is provided on the hydraulic
manifold mounted to the frame below the cab.
Hay Saver Wheel Adjustment
Figure 138. Motorized Hay Saver Wheel Speed
Adjustment
Turn the adjustment screw clockwise to increase
the speed of the hay saver wheel to a maximum of
60 RPM. Turn the screw in the opposite direction
to decrease the speed to a minimum of 36 RPM.
To Next Page
Loading...