4
Rev 4/2018
Contents Continued
In Cab Monitor (ICM) Overview ...............................33
Introduction To The Baler Monitoring System ...33
Machine / Baler Sensors ...................................33
Baling Screen ........................................................... 34
Bale Count Screen ................................................... 35
Main Screen .............................................................36
Adjust Screen ........................................................... 37
Main Screen .......................................................37
Tension Value Display Format Screen .....................38
Measure Screen ....................................................... 39
Adjust Screen ....................................................39
Preferences Screen ..................................................40
Preferences Screen ..................................................41
Measure Screen ................................................41
Info Screen ...............................................................42
Preferences Screen ...........................................43
Machine Break-In .....................................................44
After One Hour of Operation .............................46
After 50 Hours of Operation ..............................46
After 100 Hours of Operation ............................46
Pre Starting Checks .................................................47
Checking Warning Lights ...................................50
Check Warning Lights: ....................................... 50
Starting Engine ..................................................51
Operating Engine .....................................................51
After Engine Starts ............................................52
Stopping Engine ...............................................52
Hot Weather Operation ......................................53
Learning To Operate the Baler ................................54
Preparing For The Field .....................................55
Operating Speed ................................................55
Starting Baler ..................................................... 55
Operating The Baler ................................................55
Raising and Lowering Pick-up ...........................56
Engaging Baler ..................................................56
Towing SP Baler ................................................57
Settings And Adjustments ........................................ 59
Service Tires Safely ........................................... 59
Tire Inflation Pressures ......................................59
Checking Wheels ...............................................60
Steering, Hydrostatic Controls and Linkage ...... 60
Steering Adjustments .........................................61
Check Neutral, Forward and Reverse Positions 62
Fine Adjustment ................................................. 62
Coarse Adjustment ............................................62
Internal Park Brakes ..........................................63
Check and fill .....................................................63
Replace Oil ........................................................64
Air Conditioning and Heating System ...............65
Observe Air Conditioning/Heating Precautions .66
Removing Fresh Air Filter and Tray ...................66
Removing Recirculating Filter ............................ 67
Cleaning Fresh Air and Recirculating Filters ..... 68
Cleaning Dirty Evaporator Filter: .......................68
Cleaning Air Intake Panel ..................................69
Cleaning Condenser ..........................................69
To Next Page
Loading...