Problem Solving
200
Problem Solving
11
093-912 [Cause]
There is no more toner in the toner cartridge.
[Remedy]
Replace the toner cartridge.
z
Refer to "Replacing the Toner Cartridge" (P.149).
093-956 [Cause]
The machine cannot detect the drum cartridge.
[Remedy]
Remove the seal on the drum cartridge.
093-959 [Cause]
An error occurred with the drum cartridge.
[Remedy]
Replace the drum cartridge. Contact your local Fuji Xerox
representative or sales representative.
z
Refer to "Replacing the Drum Cartridge" (P.153).
116-321
116-323
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
116-324 [Cause]
An error occurred.
[Remedy]
The machine will automatically recover. Wait for a while, and try
again.
116-334
116-343
116-377
116-390
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
116-747 [Cause]
Unable to complete scanning due to the scanning area being too
small.
[Remedy]
Decrease the value of the Edge Erase or reduce the zoom ratio.
117-326
117-332
123-314
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
124-311 [Cause]
An error occurred in starting up.
[Remedy]
Contact our Customer Support Center.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
