Fuji Xerox DocuScan C4250

6.3 Screen Contrast 133
6.3 Screen Contrast
Screen Contrast allows you to adjust the contrast of the touch panel. The contrast can be
adjusted in seven levels from [Higher] to [Lower].
1. On the [System Settings] screen, select
[Screen Contrast].
2. On the [Screen Contrast] screen, adjust the
contrast of the touch panel using [ ]/[ ],
and select [Save].
Note
• To cancel the setting, select [Cancel].
6.4 Common Settings
Common Settings allows you to change the settings relating to the specifications of the
scanner.
Selecting [Common Settings] on the [System
Settings] screen displays the [Common Settings]
screen.
The following explains the settings that can be
changed under [Common Settings].
Machine Clock/Timers
Selecting [Machine Clock/Timers] on the [System Settings] screen displays the [Machine
Clock/Timers] screen.
On this screen, you can set the scanner's system clock and the time to wait until the Power
Saver mode or reset functions engage.
Screen Contrast
SaveCancel
(1 - 7)
Higher
Lower
4
Common Settings Close
Machine Clock
/ Timers
Screen Defaults
Service Availability
Other Settings
Audio Tones
Original Size
Button
Service Login
Maintenance
/ Diagnostics
Common Settings Close
Machine Clock
/ Timers
Screen Defaults
Service Availability
Other Settings
Audio Tones
Original Size
Button
Service Login
Maintenance
/ Diagnostics
Machine Clock / Timers
Close
1.
2.
3.
4.
5.
Date Format
Date Setup
Time Format
Time Setup
Time Zone
Y / M / D
2005/7/21
12 Hour Clock
06:59PM
+09:00
1/2
Items Current Settings
Change