Fuji Xerox DocuScan C4250 User Manual

3.2 Stopping a Copy Job 83
Step 7 Check the job status
As necessary, check whether the job has been processed successfully.
Selecting [Job Status] on the [All Services] screen displays the [Completed Jobs] screen.
Refer to
• For information about checking job status, refer to"5 Job Status (P. 127)"
3.2 Stopping a Copy Job
1. Press the <Stop> button on the control
panel.
A message appears confirming the
cancellation of the job.
2. Select [Yes].
A message appears informing you that the
cancellation is complete.
3. Select [Close].
Note
• Only pages that have not been transferred to the
printer can be cancelled.
Important
• Depending on the printer, you may need to cancel jobs
on the printer instead of on the scanner. In such event,
a message informing you of this appears on the touch
screen. When using the printer on a network, make
sure not to cancel other jobs by mistake.
• When starting a new copy job after cancelling a job,
make sure that the printer is in the ready-to-copy state.
STEP
1
7
Check the job
status
32 4 5 6
Cancel Job
NoYes
Do you want to cancel the job?
Job Cancelled
Close
The job has been cancelled.

Fuji Xerox DocuScan C4250 Specifications

General

Brand	Fuji Xerox
Model	DocuScan C4250
Category	Scanner
Language	English