8.7 Error Codes 215
Other Errors
If the following message appears, resolve the problem by performing the corrective action.
Error Code
Category
Cause/Remedy
CPMUO
A fault has
occurred.
Switch off the
machine.
Ensure that
the screen
disappears
before
switching it
on.
(xxx-yyy)
O O O O O [Cause] An error occurred.
[Remedy] Turn the power switch off, wait for the touch panel to go out,
and then turn the power switch back on.
If the same message appears, copy down "(xxx-yyy)". Switch
the scanner off, wait for the touch panel to go out, and then call
our Customer Support Center.
To Next Page
Loading...
Need help?
General