3.4 Setting the Basic Copy Features 85
3.4 Setting the Basic Copy Features
This section describes how to set the basic copy features.
This corresponds to " Step 4 Set the copy features (P. 80)" in “3.1 Copying Procedure”.
The basic copy features can be set on the [Basic Copying] screen.
[Basic Copying] screen
Note
• If old settings are still present on the [Basic Copying] screen, pressing the <Clear All> button on the
control panel resets them to the defaults. The defaults can be changed under [System Settings]. For
information about [System Settings], refer to "6 System Settings (P. 129)".
• Depending on the features provided by the printer, the features and defaults displayed on the scanner
vary. The interface screens in this manual are of when the printer supports all copy features of the
scanner.
STEP
1
4
Set the copy
features
3
2 5 6 7
Paper Supply
Auto Paper 100%
Auto %
More... More...
Tray 1
A4
Tray 2
A3
70%
A3´A4
Reduce
/ Enlarge
Output Color
Lighten/Darken
2 Sided
Basic Copying Image Quality
More Copy
Features
To Next Page
Loading...
Need help?
General