2.8 Setting Other Scan Features 75
Original Orientation (Specifying the Orientation of the Original)
The Original Orientation feature allows you to specify the orientation of the original to
identify which side is the top.
Selecting [Original Orientation] displays the [Original Orientation] screen.
[Original Orientation] Screen
Head to Top
Select this when placing the original on the document glass or into the document feeder with
its top towards the back of the scanner.
Head to Left
Select this when placing the original on the document glass or into the document feeder with
its top towards the left of the scanner. Make sure to select [Head to Left] when loading the
original in head-left orientation (texts are in sideways).
Note
• The scanner will not correctly recognize the top of the original if the [Original Orientation] setting does
not match the actual orientation of the original.
• This feature does not work when [File Format] is set to [TIFF] or [JPEG].
1. On the [More Scan Features] screen, select
[Original Orientation].
2. On the [Original Orientation] screen, select
the orientation of the original.
3. Select [Save].
Top
Top
Bottom
Left Right
Original placed on document glass
Top
Original loaded into document feeder
Top
Top
Bottom
Left Right
Ori
inal
laced on document
lass
Top
Original loaded into document feeder
Original Orientation
Cancel Save
Select the orientation
your originals are
loaded.
The selected Original
Orientation becomes
invalid if TIFF or JPEG
is selected as File Format.
Head to Top
Head to Left
To Next Page
Loading...