160 6 System Settings
Reduce/Enlarge - 3
Sets the default copy ratio of the third button of the four displayed under [Reduce/Enlarge]
on the [Basic Copying] screen.
1. On the [Basic Copying] screen, select [3.
Reduce/Enlarge - 3], and select [Change].
2. On the [3. Reduce/Enlarge - 3], select the
desired copy ratio.
3. Select [Save].
Note
• To cancel the setting, select [Cancel].
Copy Defaults
Selecting [Copy Defaults] on the [Copy Settings] screen displays the [Copy Defaults]
screen.
On this screen, you can set the default of each copy feature.
The copy features will reset to the defaults when the scanner is switched on, when it is re-
activated from the Power Saver mode, or when the <Clear All> button is pressed.
Set frequently-used settings to save the time of entering them on the control panel.
Note
• The setting items and values vary depending on the printer. The screens used in this section are of when
the printer supports all copy features of the scanner.
Refer to
• For more information about the copy features, refer to "3 Copy (P. 79)".
3. Paper Supply - 3
Cancel Save
70%
50%
81%
86%
115%
122%
A3´A5
A3´A4/B4´B5
B4´A4/B5´A5
B4´A3/B5´A4
A3´B4/A4´B5
A4´B4/A5´B5
1/2
Copy Settings
Close
Basic Copying
Auto Exposure
Level
Copy Defaults
Print Auditron
Settings
Copy Defaults
Close
1.
2.
3.
Paper Supply
Paper Type - Bypass
Paper Size - Bypass
Auto Paper
Plain
A3
4.
Reduce / Enlarge
100%
Black
5.
Output Color
1/1
Change
Items Current Settings
To Next Page
Loading...