Fuji Xerox DocuScan C4250 User Manual

2.7 Setting the Basic Scan Features 61
2.7 Setting the Basic Scan Features
This section explains how to set the basic scan features.
This corresponds to " Step 4 Set the scan features (P. 32)" in “2.1 Scanning Procedure”.
The basic scan features can be set on the [Basic Scanning] screen.
[Basic Scanning] screen
Note
• The above screen is the [Basic Scanning] screen when [Scan to E-mail] is selected. The content of the
screen, however, is the same even when [Scan to PC] or [Scan to Media] is selected.
• If old settings are still present on the [Basic Scanning] screen, pressing the <Clear All> button on the
control panel resets them to the defaults. The defaults can be changed under [System Settings]. For
information about [System Settings], refer to "6 System Settings (P. 129)".
From the [Basic Scanning] screen, access the setting screen for each available feature.
<Example>
On each setting screen, configure the required settings and select [Save] when you are
done.
When you want to delete or cancel the settings you entered, select [Cancel].
STEP
1
4
Set the scan
features
2 5 6 73
Output Color
Full Color
Black
PDF
DocuWorks
More...
Grayscale
TIFF
File Format
Original Type
Lighten/Darken
2 Sided Orig.
E-mail Address Basic Scanning
More Scan
Features
File Format
Cancel Save
PDF
DocuWorks
TIFF
Multi-page
TIFF
JPEG

Fuji Xerox DocuScan C4250 Specifications

General

Brand	Fuji Xerox
Model	DocuScan C4250
Category	Scanner
Language	English