Fuji Xerox DocuScan C4250 User Manual

56 2 Scan
 Password
Set the password for the user set in [User Name]. This setting is mandatory.
Enter the password within 32 characters or symbols.
1. Select [T] on the right side of the [Save In]
screen to display the [Password] entry box.
2. Select the [Password] entry box.
3. Enter the password using the numeric
keypad on the control panel.
Setting the File Name
Selecting [Change File Name...] on the [Save In] screen displays the [Change File Name]
screen. On this screen, you can set the file name of the scanned data and specify the action
to be taken when a file name conflict occurs.
 File Name
Set the file name of the scanned data.
When this is left blank, the file name will be assigned automatically based on the following
rule:
• Starts with "img-" followed by a nine-digit number indicating the saved date and time.
October, November, and December, however, are indicated as "X", "Y", and "Z",
respectively.
Example: img-102030400 January 2nd, 03:04:00 (hr:min:sec)
img-X11123045 October 11th, 12:30:45 (hr:min:sec)
When entering the file name, follow the guidelines below:
• Enter it within 20 characters or symbols.
1/2
User Name
Address Book... Change File Name...
Preview
SMB FTP
Save In Basic Scanning
More Scan
Features
Server
Save In
DCSERVER
planning/data
smith
Password
2/2
Address Book... Change File Name...
Preview
SMB FTP
Save In Basic Scanning
More Scan
Features
*****
1/2
User Name
Address Book... Change File Name...
Preview
SMB FTP
Save In Basic Scanning
More Scan
Features
Server
Save In
Change File Name Cancel Save
File Name (Max. 20 chars.)
File Name Conflict
Restore Auto
Change Name and Save
(Auto Set)

Fuji Xerox DocuScan C4250 Specifications

General

Brand	Fuji Xerox
Model	DocuScan C4250
Category	Scanner
Language	English