Fuji Xerox DocuScan C4250

90 3 Copy
[Reduce/Enlarge] Screen
Selecting [More...] on the [Basic Copying] screen displays the [Reduce/Enlarge] screen.
Preset %
Select this to select a copy ratio from the preset options.
Variable %
Select this to enter the desired copy ratio. The copy ratio can be specified from 50 to 200%
in increments of 1%. The original will be reduced/enlarged in the same proportions for X and
Y directions.
1. On the [Reduce/Enlarge] screen, select
[Preset %]. From the list of preset options
on the right side of the screen, select the
desired copy ratio, and select [Save].
Note
• When the copy ratio is selected from [Present %], the
output size may not exactly match the selected preset
%. Use the paper sizes displayed on the screen as a
reference when selecting a preset %.
2. Select [Variable %] on the [Reduce/
Enlarge] screen, and specify the copy ratio
using the numeric keypad or [ ]/[ ] in
increments of 1%.
Note
• To clear an incorrect entry, press the <C> button.
3. Select [Save].
Reduce / Enlarge
Cancel Save
Auto %
100%
Preset %
Variable %
50%
70%
81%
86%
1/2
A3´A4/B4´B5
A3´A5
B4´A4/B5´A5
A3´B4/A4´B5
(50 - 200)
100 %
Reduce / Enlarge
Cancel Save
Preset %
Variable %
123
456
789
0C