Fujitsu Airstage V series - Function and Setting of each Switch - Indoor Unit (Compact Wall Mounted Type)

02-19
2-3-2 Indoor Unit ( COMPACT WALL MOUNTED TYPE )
SW1 setting
* COMFORT MODEL
Fan speed setting switch (Never change at the site)
External input select edge / pulse
The fan speed corresponding to each model is set with the switch.
This switch is used to select the format of external input command as shown in the table below.
OFFSW1-1
SW1-2
OFF
ON ONOFF
ON
OFF ON
AS*E07
AS*E09 AS*E12
AS*E14
Model code setting switch (Never change at the site)
The model code information corresponding to each model is provided with the switch.
OFFSW2-1
SW2-2
OFF
ON ONOFF
ON
OFF ON
AS*E07
AS*E09 AS*E12
AS*E14
External input select
Pulse
SW1-4
ON
Edge
OFF
( Factory setting)
( Factory setting)
SW2 setting
DIP-SW 1-3 setting forbidden
SW 1-3 OFF
( Factory setting)
DIP-SW 2-3 setting forbidden
SW 2-3 OFF
Auto restart validity / invalidity.
The auto restart function becomes validity by changing the switch position from OFF to ON.
AUTO RESTART SETTING
Auto restart
Validity
SW2-4
ON
Invalidity
OFF
( Factory setting)