Fujitsu Airstage V series - Memory Backup Setting; SW42 Initial Setting Button

02-29
SW2-6 2-7 setting forbidden.
Memory backup setting
Memory backup setting
SW2-8
ON
OFF
SW 2-6 OFF
SW 2-7 OFF
When installing the central remote controller, this switch must be set to ON.
(factory setting : OFF)
OFF
ON
At the time of shipment, the battery is turned off to avoid electricity consumption.
Be sure to set this switch to ON.
SW42 Initial setting button
( Factory setting)
This switch is used when initializing the central remote controller.