05-11
2
Press the PROGRAM(
CLOCK
ADJUST
) button.
Don't press the PROGRAM
button for more than 2 seconds,
otherwise it enters to the
time setting mode.
1
3
To set the WEEKLY timer
Press the Select buttoin to select the indoor unit.
ALL indoor unit
CLOCK ADJUST
*
Day of the week setting
DAY
Press the DAY button to select the day of the week
For ALL, all of the days can be set together when a
appears around each day.
ALL
S M T W T F S
SUN MON TUE WED THE FRY SAT
*If the "ALL indoor unit" is selected, the timer of all of registered indoor units
are set up at one time.
*
4
Time setting
Press the Set Time buttons to set the time in 10-minute increments.
advance
reverse
no setting
ex. 24-hour display
(cancel)
5-7-2 Group Remote Controller
UTB - YDA/GDA
WEEKLY TIMER
The timer can be set up on different schedule for every day of the week.
The timer can be set up 4 times in a day.
Each timer can be set up operation/stop, operation mode, setting temperature.
1. WEEKLY TIMER
Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
The timer function is not available depending on the initial setting.
Press the Timer Mode(DELETE) button to start or cancel the WEEKLY timer operation.
Press the ALL TIMER button to start or cancel the WEEKLY timer operation.
If at least one timer is operated,
the timer operations of all of the indoor units are canceled at one time.
If all of timers are not operated,
the timer operations of all of the indoor units are set up at one time.
To start / cancel the WEEKLY timer operation
The operating time for the current day is displayed.
AM
PM
AM
PM
To Next Page
Loading...
Need help?
General
