• Take servicing, etc. into consideration and leave the space as follows.
300 mm or more
40 mm or more
¢
Installation
CAUTION
• The installation direction can be selected either horizontal (pattern A) or vertical (pattern B), but
keep the inclination within 5°.
– Pattern A
Horizontal installation
Level
Wire
OUTDOOR
UNIT SIDE
INDOOR
UNIT SIDE
UPWARD
– Pattern B
Wire
Level
Vertical installation
OUTDOOR
UNIT SIDE
INDOOR
UNIT SIDE
UPWARD
• Incorrect installation direction or angle may cause improper operation.
• Suspended installation
Remove the 2 screws and replace them with the hanger.
Use hanger bolts to fasten the hanger.
Hanger
M10 hanger bolt
(Locally purchased)
M10 nut A
M10 nut B
Screw
3-2. EV kit
- (06-39) - 3. Piping connection
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
