¢
Attach the insulation material
Insulation by the coupler heat insulation around the pipe.
Coupler heat insulation Coupler heat insulation
No gap
No gap
¢
Wiring procedure
1. Connect the EV kit wire to the indoor unit.
2. Wrap the tube around the connection, and fasten both ends binders.
3. Connect the ground to the indoor unit.
Indoor unit
Connect
Tube (short)
Wire (indoor unit)
Binder (small)
Ground
EV kit wire
CAUTION
Never bundle the wire with power supply.
¢ Specifications
Model name UTR-EV09XB UTR-EV14XB
Dimensions (H × W × D) mm 121 × 416 × 65
Weight g 1,500
Connection wire length method m 5
3-2. EV kit - (06-41) - 3. Piping connection
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
