Fujitsu AJ 126LELDH Series - Page 885

6. Indoor unit lamps will indicate the function setting number as follows:
Case 1: When setting number is one digit
Indoor unit lamps will indicate the function setting number on the OPERATION (Green) lamp,
TIMER (Orange) lamp, and FILTER (Red) lamp.
OPERATION
(Green)
TIMER
(Orange)
Flashes times of
function numbers
(the left digit)
Flashes times of
function numbers
(the right digit)
FILTER
(Red)
Flashes times of
setting numbers
(the right digit)
Example) Function number: 30; Setting number: 01
OPERATION lamp
(Green)
TIMER lamp
(Orange)
FILTER lamp
(Red)
0.5 sec ON / 0.5 sec OFF
OFF
1 time 1 time
3 times 3 times
...
...
(Phase1) : 12 sec (Phase1) : 12 sec
0.5 sec ON / 0.5 sec OFF
When the number setting is “0”, TIMER lamp and FILTER lamp will not flash.
Case 2: When setting number is two digits
Indoor unit lamps will indicate the function setting number on the OPERATION (Green) lamp,
TIMER (Orange) lamp, and FILTER (Red) lamp.
OPERATION
(Green)
TIMER
(Orange)
Flashes times of
function numbers
(the left digit)
Flashes times of
function numbers
(the right digit)
FILTER
(Red)
Flashes times of
setting numbers
(the right digit)
Example) Function number: 26; Setting number: 31
OPERATION lamp
(Green)
TIMER lamp
(Orange)
FILTER lamp
(Red)
0.5 sec ON / 0.5 sec OFF
0.5 sec ON / 0.5 sec OFF
OFF
OFF
1 time
3 times
2 times
6 times
...
...
...
(Phase1) : 12 sec (Phase2) : 12 sec
0.5 sec ON / 0.5 sec OFF 0.5 sec ON / 0.5 sec OFF
The indication of "Phase1" and
"Phase2" is alternately repeated.
Phase1
OPERATION
(Green)
TIMER
(Orange)
OFF OFF
FILTER
(Red)
Flashes times of
setting numbers
(the right digit)
Phase2
When the number setting is “0”, TIMER lamp and FILTER lamp will not flash.
RELATED LINKS
"Function details" on page 07-108
¢
Confirmation of function setting
To confirm the function setting is properly configured, press the TIMER set (+) button.
TIMER set (+) button
Correct:
Beeps are emitted intermittently as follows:
(2 short beeps,
1 long beep, 4 short beeps,
and 1 long beep)
Wrong:
(3 sec)
(2 short beeps and 1 long beep)
2-4. Indoor unit (setting by wireless remote controller)
- (07-89) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS