2. Address screen is displayed. Select the address of the indoor unit whose function number is to
be set by touching “ ” or “ ”. When setting at all the indoor units, touch “All”.
002–01
Address
Cancel OK
All
When “OK” is touched, the display returns to the Function Setting screen.
3. Touch “Function No.” on the Function Setting screen.
[002–01]
[00]
[00]
Address
Function No.
Setting No.
Function Setting
Back Setting
4. Function No. screen is displayed. Set the Function No. by touching “ ” or “ ”.
When “OK” is touched, the display returns to the Function Setting screen.
5. Touch “Setting” on the Function Setting screen.
[002–01]
[30]
[00]
Address
Function No.
Setting No.
Function Setting
Back Setting
*
1
*1: When “All” is selected in step 2, and different Setting No. is set from 2 or more indoor units,
“-” is displayed here.
6.
Setting screen of “Setting No.” is displayed. Set the Setting No. by touching “
” or “ ”.
Example) Function number: 30; Setting number:01
01
[002–01]
[30]
Function Setting
Cancel OK
Address
Function No.
Setting No.
When “OK” is touched, the Function Setting verification screen is displayed.
2-8. Indoor unit (setting by UTY-RNR
Z)
- (07-103) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
