6. SETTINGS ON WEB INTERFACE
6-29
3. Click the appropriate PPPoE network connection.
4. Click the [Connect] button.
5. Input the PPPoE user name and password, then click the [OK] button.
Your computer should now be connected to the internet.
How to disconnect from a PPPoE connection
To disconnect from a PPPoE connection, do the following:
1. In the bottom right-hand corner of the desktop, click the network icon .
2. Click the appropriate PPPoE connection. If the connection name was not changed
when you registered it, it will appear as "Broadband Connection". Further, if you
are currently connected, the indication "Connected" appears below the connec-
tion name.
3. Click the network name again, then click "Disconnect". The PPPoE connection is
severed when the "Connected" indication disappears.
To Next Page
Loading...
