6. SETTINGS ON WEB INTERFACE
6-28
How to connect to the internet via PPPoE
Note: The following procedure uses Windows
®
10 for screenshots. If your PC is using
a different Windows
®
version, see your Windows
®
manual for the correct method to
access the network settings.
Connect to the internet with a dial-up application.
1. In the bottom right-hand corner of the desktop, click the network icon .
A list of available networks appears.
2. Click the appropriate PPPoE network connection.
If you didn't change its default name, the connection should be called "Broadband
Connection".
A window similar to the one shown below appears.
To Next Page
Loading...
