6. SETTINGS ON WEB INTERFACE
6-31
5. Click the [Next] button.
6. Referring to the following table, set up the LAN port and select a service name.
7. Click the [Next] button.
Item Description
Connection Type Shows the registered connection type.
Group Name Shows the registered group name.
Port Select LAN port from [LAN1], [LAN2], [LAN3], and [LAN4].
LAN port in use appears in gray.
Data connection
service
Select the service to use from "Standard Data", "Streaming
8kbps", "Streaming 16kbps", "Streaming 32kbps", "Streaming
64kbps", "Streaming 128kbps", "Streaming 256kbps"*.
*: FELCOM501 only
Header Compres-
sion
Put a [9] in the box to activate the header compression.
Compress the header area of the communication protocol, and re-
duce the communication volume.
Prev button Return to the previous step while keeping the setting information.
Next button Go to the next step.
To Next Page
Loading...
