Furuno FELCOM501 - Page 149

6. SETTINGS ON WEB INTERFACE
6-39
Import button Import the IP filter settings.
1) Click the [Import] button.
The message "Overwrite the IP filter list in this group. Are
you sure?" appears.
2) Click the [OK] button.
The [Open] dialog box appears.
3) Select the zip file of the IP filter settings to import, then click
the [Open] button.
The message "Input a password for the import file if neces-
sary" appears.
4) If a password was set when the filter settings were export-
ed, input the password.
5) Click the [OK] button.
6) Input the administrator password.
7) Click the [OK] button.
8) Click the [Close] button.
Export button Export the IP filter settings.
1) Click the [Export] button.
The message "Input a password for the export file if neces-
sary." appears.
2) Input a password as necessary. This password will be re-
quested when the settings are imported.
3) Click the [OK] button.
The [Save] dialog box appears.
4) Click the [Save] button.
The DNS filter data is saved in zip format.
Note: Do not unzip the archives. Unzipped files cannot be
imported.
Change priority
Up button Raise the priority for the [9] of the item.
The button appears in gray when there is no check, or multiple
checks.
Down button Lower the priority for the [9] of the item.
The button appears in gray when there is no check, or multiple
checks.
Apply button Apply the priority change.
Item Description