Furuno FELCOM501 - Page 24

1. BASIC OPERATION
1-6
If the PIN code is locked
If the wrong PIN code is input three times, the current PIN number becomes locked
and the following screen appears.
Do the procedure below to unlock the PIN code.
1. Press S to select the [Username] field, then press the Enter key.
2. Input "Admin" (without the quotation marks), then press the Enter key.
For how to input the user name, see section 1.5.2.
3. Press T to select the [Password] field.
4. Input the password (default:
Fb1234567890), then press the Enter key.
For how to input the password, see section 1.5.2.
5. Press T to select [OK], then press the Enter key.
The [Input PUK] screen appears.
6. Press the 0 to 9 key to input the 8-digit PUK code.
7. Press S or T to select the [Input new PIN] field.
8. Press the 0 to 9 key to input the new 4- to 8-digit PIN code.
9. Press S or T to select [OK], then press the Enter key.
If the PUK code is input correctly, the main screen appears on the IP Handset. If
input wrong, the message "Invalid PUK" appears.