2. IP HANDSET OPERATIONS
2-2
prefix is input, the call is place based on the setting for [Outgoing Service] on the
[Phone List] screen (see section 6.2).
Depending on SIM card contract, "3.1kHz Audio" cannot be used. Contact the
company which issues your SIM card for details.
Note 3: You can use the shortcut “0*” to redial the last used number.
2. Press , the # key or the Enter key to place a call.
The following screen appears.
Note 1: If a number is input and there is no operation of any key for several sec-
onds, the call is automatically placed.
Note 2: If the connection fails, the following screen appears.
3. Complete the conversation.
During the conversation, the duration of the communication time is counted and
displayed on screen in seconds.
Service Charge Selection Method
Display on main
screen
4kbps AMBE+2
(Standard quality)
Low cost [1][*] + subscriber number
Voice
3.1kHz Audio
(High quality)
High cost [2][*] + subscriber number
Fax
XXXXXX
XXXXXX
(200020FB)
Error code
To Next Page
Loading...
