2. IP HANDSET OPERATIONS
2-3
4. Press the key or replace the IP Handset in the cradle to end the call.
The following screen appears.
5. Press the key to go back to the main screen.
Note: To place a phone call from land to the FELCOM251/FELCOM501, dial the iden-
tification code of the phone carrier, [870] (ocean area code) then the Inmarsat number.
How to call from the [History] screen
A number can be dialed directly from the [History] screen. For more information about
the [History] screen, see section 2.3.
1. At the main screen, press the key.
2. Press X to open the [History] screen.
The top in the list is the most recent number.
The caller’s name appears in the [History] screen if it is registered in the [Contacts]
list. "No caller ID" appears if the number is hidden.
Note: When there are no numbers registered in the [History] screen, "No list." ap-
pears.
3. Press T or S to select a number.
4. Press the key to open the sub-menu, or press the key.
If you press the key, go to step 6.
Note: Press the Enter key to display the complete information for the selected
number. The incoming/outgoing call time log, etc. display.
XXXXXX
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄
㻚㻚㻚
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
㻜㻜㻤㻝㻣㻥㻤㻢㼄㼄㼄㼄㼄
: Received
: Called
: Missed*
*: Calls received from an external number and which are not
answered from any handset are considered “missed” calls.
: Communication failed
: Communication successful
To Next Page
Loading...
