APPX. 3 ALERT MESSAGES
AP-20
Opening Grib File The GRIB file (weather in-
formation) stored in the
TZT is being opened.
–
NAVpilot Connection Lost Connection with the
NAVpilot is lost.
Check the connection with the NAVpilot.
Check that power is supplied to the
NAVpilot.
NAVpilot Engaged AUTO/NAV/WIND/TURN/
FISH HUNTER/SABIKI is
being performed from
STBY on the NAVpilot or
the TZT.
–
NAVpilot Disengaged Navigation by the NAVpilot
is canceled.
–
Safe Helm Activated The safe helm function is
activated. (The NAVpilot
steering mode is temporar-
ily switched to the manual
mode.)
Safe Helm Deactivated The safe helm function is
deactivated.
Position Lost No positioning data. Check for objects which may be blocking
reception. Check the connection be-
tween the built-in GPS antenna/external
GPS and the MAIN board.
Heading Lost No heading data. Check the connection with the heading
sensor. Check the heading sensor.
Depth Alarm The depth is lower than the
value set for the depth
alarm.
Take immediate evasive action to pre-
vent grounding.
Sea Surface Temperature
Alarm
The sea surface tempera-
ture matches the value set
for the sea surface tem-
perature alarm.
–
SST Shear detected Shear is detected. –
Speed Alarm The ship speed matches
the value set for the ship
speed alarm.
–
Max Wind Speed Exceed-
ed
The wind speed matches
the value set for the wind
speed alarm.
–
Low Fuel Alarm The fuel level is lower than
or equal to the value (%)
set for the low fuel alarm.
Refill the fuel.
MOB A MOB mark is input. –
XTE Alarm This alarm alerts you to
course deviation.
The notification will disappear when the
set course is recovered.
Anchor Watch Alarm Your ship has moved a dis-
tance greater than the val-
ue set for the anchor watch
alarm.
The notification will disappear when the
ship returns within the specified dis-
tance.
Waypoint Crossing Notifi-
cation
Your ship arrived at the
destination.
–
End of Route Notification Your ship has arrived at the
final destination.
–
Text Meaning Remedy
To Next Page
Loading...
