EasyManua.ls Logo

Furuno NAVNET TZ2 TZTL12F - Page 402

Furuno NAVNET TZ2 TZTL12F
420 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPX. 3 ALERT MESSAGES
AP-21
Fuel Active Route The fuel is expected to run
out during the route naviga-
tion.
Refill the fuel.
NMEA 2000 Logging NMEA2000 log is being re-
corded.
Boundary Line Crossed Your ship has crossed a
boundary line.
In Alarm Zone Your ship has entered a
boundary line.
Near Alarm Zone Your ship is near a bound-
ary line.
Check Engine! Engine error. Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Over Temperature! Engine error (overheat). Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Low Oil Pressure! Engine error (oil pressure
drop).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Low Oil Level! Engine error (oil level
drop).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Low Fuel Pressure! Engine error (fuel pressure
drop).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Low System Voltage! Engine error (voltage
drop).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Low Coolant Level! Engine error (coolant level
drop).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Water Flow! Engine error (water flow). Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Water in Fuel! Engine error (mixture of
water in fuel).
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Charge Indicator! Engine indicator error. Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Preheat Indicator Engine indicator error. Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
High Boost Pressure! The discharge pressure of
the engine pump is too
high.
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Rev Limit Exceeded! The engine rotation speed
has exceeded the upper
limit.
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
EGR System! EGR system (engine) er-
ror.
Refer to the operator's manual for the
engine and contact the engine manufac-
turer.
Text Meaning Remedy

Table of Contents

Related product manuals