GE Security Vigilant VS2 User Manual

Chapter 3: System operation
150 Vigilant VS1 and VS2 Technical Reference Manual
Event ID Event description Event ID Event description
041 System AC power: There is a
problem with the panel’s AC power
and/or a remote auxiliary/booster’s
AC power
093 Zone 23 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 23)
042 Common alarm: An alarm event is
taking place on the control panel
094 Zone 24 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 24)
043 Common supervisory: A supervisory
event is taking place on the control
panel
095 Zone 25 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 25)
044 Common monitor: A monitor event is
taking place on the control panel
096 Zone 26 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 26)
045 Common trouble for telco dialer: A
trouble event, other than a DACT
delivery fault is taking place on the
control panel
097 Zone 27 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 27)
046 Common trouble for network dialer:
A trouble event, including a DACT
delivery fault is taking place on the
control panel
098 Zone 28 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 28)
047 Self test fault: A fault has been
detected while testing the panel’s
internal subsystems (memory, flash,
code, etc.)
099 Zone 29 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 29)
048 Internal fault: The control panel
detected an internal hardware or
software error
100 Zone 30 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 30)
049 Dialer dsbl/rem disc: The dialer was
disabled by the Remote Disconnect
button
101 Zone 31 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 31)
050 Dialer line 1 fault: A ground fault or
line fault has been detected on line 1
of the dialer
102 Zone 32 (active, trouble, disable,
prealarm, alarm verify, maintenance
alert, or test has been detected on
zone 32)
051 Dialer line 2 fault: A ground fault or
line fault has been detected on line 2
of the dialer

GE Security Vigilant VS2 Specifications

General

Brand	GE Security
Model	Vigilant VS2
Category	Control Panel
Language	English