Chapter 2: Front panel programming
108 Vigilant VS1 and VS2 Technical Reference Manual
To program an annunciator:
1. Press the Menu button and choose Programming.
2. Choose Advanced Program and enter the level 2
password.
3. Choose Panel Configuration.
4. Choose Annunciator.
5. Choose the annunciator you want to program.
6. Program each annunciator in the system using
Table 28 on page 107.
7. When you finish programming each option, choose
Save.
8. Press the Menu button to exit menu mode, or
continue programming.
Panel Configuration
Panel NAC
Ann. Class A<>
Annunciator
⇩
Annunciator
Annunciator 01
Annunciator 02
Annunciator 03
⇩
Annunciator 01
Type Off<>
Expanders 1
Label >
⇩
Annunciator 01
Label >
Event Notification
Save
Central monitoring station device programming
CMS device programming
CMS devices are the devices that transmit system events to a central monitoring
station’s receiver. This includes the dialer and the network.
Table 29: CMS device options
Option Description
Dialer See “Dialer programming” on page 110.
Network See “CMS network (receiver) programming” on page 112.
Swinger shutdown Set swinger shutdown to Off or 1 to 255 repetitions. When you have
finished, press Enter to save.
Note: Off is the only acceptable setting for UL/ULC installations. See
“UL 864 programming requirements” on page 31 for details.
This automatically inhibits the number of consecutive times a single
trouble event is transmitted over a 24-hour period before it is no
longer sent. Some trouble events are not affected when swinger
shutdown is set. They are:
To Next Page
Loading...
Need help?
General
