GE Security Vigilant VS2 User Manual

Chapter 2: Front panel programming
Vigilant VS1 and VS2 Technical Reference Manual 59
Dialer options
Table 18 describes the options used to set up the dialer.
Table 18: Auto programming — Dialer options [1]
Option Description
Account 1 Account ID: Enter the four-digit ID code for account 1
(Note: If you do not change the default of FFFF, no
events will be sent.)
Primary receiver number: Enter the primary
receiver’s phone number. Up to 20 digits (0-9, *, #,
and ,). The comma causes a two-second delay in
dialing. The number or hash symbol (#) and the
asterisk symbol (*) are used with calling feature
codes and services. Consult your telephone service
provider.
Secondary receiver number: Enter the secondary
receiver’s phone number. Up to 20 digits (0-9, *, #,
and ,). The comma causes a two-second delay in
dialing.
Format: CID
CID: Contact ID is the alarm format that the
monitoring facility (DACR) will receive. See “Default
contact ID event codes” on page 39.
Event notification: Set event notification (event
reporting) to:
Device: Only device information is reported or
transmitted, no zone information. Note: This setting
uses default device event notification settings for
reporting events. See “Factory default settings” on
page 35.
Zone: When a device is a member of a zone, only the
zone information is reported or transmitted, no
device information.
Note: This setting uses default zone event
notification settings for reporting events. See
“Factory default settings” on page 35.
Event: Only the event type (alarm, supervisory,
trouble, etc.) is reported or transmitted, no device or
zone information. Note: This setting uses the default
CMS event notification settings for reporting events.
See “Factory default settings” on page 35.
Account 1
Account ID 6769
Primary Recver# >
Secondary Recver# >
⇩
Account 2
Account ID 6769
Primary Recver# >
Secondary Recver# >
⇩
Format CID<>
Event Notif. Event>
-------------------
Save
Account 2 Account ID: Enter four-digit ID code for account 2
Primary receiver number: Enter the primary
receiver’s phone number (up to 20 digits).

GE Security Vigilant VS2 Specifications

General

Brand	GE Security
Model	Vigilant VS2
Category	Control Panel
Language	English