GE Security Vigilant VS2 User Manual

Chapter 2: Front panel programming
Vigilant VS1 and VS2 Technical Reference Manual 117
To set the Panel Configuration lock remote read option:
1. Display the panel configuration options menu. See
“Panel programming” on page 103.
2. Choose Lock Rmt Read.
3. Select either:
Yes: Telnet, ping, and CU read access to the panel are
restricted.
No: Telnet is restricted, but ping and CU read access
to the panel are allowed.
4. Program other panel configuration options or choose
Save if you’re finished.
5. Press the Menu button to exit menu mode, or
continue programming.
Panel Configuration
MSK 255.255.255.000
GWY 000.000.000.000
Lock Rmt Read Yes<>
Panel Configuration
GWY 000.000.000.000
Lock Rmt Read Yes<>
Save
AC voltage programming
AC Voltage is used to select the rated voltage of the mains supply connected to the
control panel. The possible values are 110, 115, 120, 220, 230, and 240 VAC.
Note: Use 110, 115, and 120 only on 120 VAC control panel models. Use 220, 230, and
240 only on 230 VAC control panel models.
To set the AC voltage:
1. Display the panel configuration options menu. See
“Panel programming” on page 103.
2. Choose AC Voltage.
3. Select 110, 115, 120, 220, 230, or 240.
4. Program other panel configuration options or choose
Save if you’re finished.
5. Press the Menu button to exit menu mode, or
continue programming.
Panel Configuration
GWY 000.000.000.000
Lock Rmt Read Yes<>
AC Voltage 120<>
Panel Configuration
Lock Rmt Read Yes<>
AC Voltage 120<>
Save
Panel operation programming
The panel operation options control how the panel operates. Most options have a
factory default setting that you can accept or change. See “Factory default settings”
on page 35.

GE Security Vigilant VS2 Specifications

General

Brand	GE Security
Model	Vigilant VS2
Category	Control Panel
Language	English