GE Security Vigilant VS2 User Manual

Chapter 3: System operation
Vigilant VS1 and VS2 Technical Reference Manual 161
Table 42: Loop events that can be disabled
Event ID
Loop 1 fault 001
Loop 2 fault 011
Loop 1 card fault 003
Loop 2 card fault 013
Loop 1 unconfigured alarm 004
Loop 2 unconfigured alarm 014
Loop 1 unconfigured trouble 005
Loop 2 unconfigured trouble 015
To disable or enable a loop event:
1. Press the menu button and choose Control.
2. Enter a level one password.
3. Choose Enable/Disable.
4. Choose Loop Event.
5. Select the loop event type that you want to disable or
enable.
See “Event ID numbers and descriptions” on page
146 for event descriptions and the list above for the
events that can be disabled.
6. Press Enter.
7. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Control
Reports
Test
Control
Program
⇩
Enter Password
0000
⇩
Control
Enable/Disable
Activate/Restore
⇩
Enable/Disable
Zone
Panel Event
Loop Event
⇩
Loop Event Disable<>
001
Event 001
— or —
Loop Event Enable<>
001
Event 001

GE Security Vigilant VS2 Specifications

General

Brand	GE Security
Model	Vigilant VS2
Category	Control Panel
Language	English