Chapter 2: Front panel programming
50 Vigilant VS1 and VS2 Technical Reference Manual
To restore the default settings:
1. Press the menu button and choose Program.
2. Choose Restore Defaults.
3. Enter a level two password.
4. Select either Panel Only, CMS Only, or Panel and CMS.
Panel only: Restores only the panel’s defaults (panel
operation options and panel configuration options)
CMS only: Restores only the dialer, network, and
swinger shutdown defaults
Panel and CMS: Restores both the panel and CMS
device defaults
5. Press Enter.
6. Return to the Program menu.
7. Choose Panel Restart.
8. Choose Yes.
The panel restarts, and the factory default settings
are reloaded into the database.
Main Menu
Reports
Test
Control
Program
⇩
Program
Clear History
Password
Restore Defaults
⇩
Enter Password
0000
⇩
Restore Defaults
Panel Only
CMS Only
Panel and CMS
To Next Page
Loading...
