GE Security Vigilant VS2 User Manual

Chapter 2: Front panel programming
Vigilant VS1 and VS2 Technical Reference Manual 77
In advanced programming, you can custom program the loop configuration options
(loops, devices, zones, etc.), panel configuration options (annunciators, dialer,
network, printer, etc.), panel operation options (language, marketplace, AC fail delay,
etc.), panel events, and loop events. All of these options can be programmed directly
from the front panel.
To do advanced programming, you must have a level two password and it is
recommended that you complete the programming worksheets and have them
available before beginning to program the system. Go to Appendix B “Worksheets” on
page 195 to get a copy of each worksheet.
Note: Before starting the auto programming sequence, set the time and date and
change the default passwords. See “Changing the passwords” on page 49 and
“Setting the time and date” on page 46.
Panel and loop programming options
Advanced programming lets you customize panel operation, panel configuration, and
loop configuration. Configuration options include:
• Annunciator class programming
• Annunciator programming
• CMS device programming
• Dialer programming
• NAC programming
• Network programming
• Network card programming
• Printer programming
Loop configuration options include:
• Correlation groups programming
• Device programming
• Loop 2 enable
• Loop class programming
• Zone programming
Panel operation options include:
• Language
• Marketplace
• AC fail delay
• Zone resound
• Reset inhibit
• Auto signal silence
• In-suite signal silence
• Day start
• Night start
• Daylight savings
• Date
• Aux power reset
• LCD banner
• Key #1
• Key #2
Advanced programming for panel and loop options is covered in the following topics
in this chapter.

GE Security Vigilant VS2 Specifications

General

Brand	GE Security
Model	Vigilant VS2
Category	Control Panel
Language	English