page | 125
Basic Operation
Menu System
Basic Operation
4. Press the ▲ or ▼ buttons to select Discovery Settings.
5. Press the OK button to enter the menu.
6. The current read / write status of the Discovery Service will be displayed.
7. Press the OK button, again, to edit the current setting.
8. Press the ▲ or ▼ buttons to select either Read / Write, Read Only, or Disabled.
► Read / Write
This mode will permit the discovery of the Matrix Controller on the network.
In addition, the IP settings, description, and other settings for the Matrix
Controller can be changed using the Syner-G Software Suite.
► Read Only
This mode only permits the discovery of the Matrix Controller on the network.
► Disabled
This mode prevents the discovery of the Matrix Controller on the network.
discovery:
read / write
discovery: (edit)
read / write
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
discovery settings
OR
To Next Page
Loading...
