Gefen EXT-CU-LAN User Manual

page | 75
Accessing the Menu System
1. After connecting power to the Matrix Controller, the following message will appear in
the Status window:
2. After a few moments, the passcode screen will be displayed. This screen is also
displayed after about 1 minute of inactivity, for security purposes.
3. Use the numerical keypad to enter the passcode. The default passcode is 123456.
To change the passcode, refer to Creating Groups (page 38).
4. Press the OK button.
5. The standby screen will be displayed:
Basic OperationBasic Operation
ENTER PASSCODE:
Menu System
press any key
to start
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
ext-cu-lan
initializing...
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
OR

Gefen EXT-CU-LAN Specifications

General

Brand	Gefen
Model	EXT-CU-LAN
Category	Controller
Language	English