Gefen EXT-CU-LAN User Manual

page | 137
Basic Operation
Menu System
Rebooting the Matrix Controller
Rebooting the Matrix Controller is identical to disconnecting and reconnecting the power
supply on the back of the unit. Rebooting the Matrix Controller may be required after
changing specic system settings. Rebooting does not reset the Matrix Controller to
factory-default settings. To reset the Matrix Controller, see Resetting the Matrix Controller
(page 133).
1. From the standby screen, press the Menu button. See Accessing the Menu System
(page 75) for information on how to display the standby screen.
2. The Network menu will be displayed.
3. Press the ▲ or ▼ buttons to select the System menu.
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
network
system
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®

Gefen EXT-CU-LAN Specifications

General

Brand	Gefen
Model	EXT-CU-LAN
Category	Controller
Language	English