Gefen EXT-CU-LAN User Manual

page | 51
Basic Operation
Routing
Inputs to Outputs
1. Click Main tab.
2. Click the desired group button.
3. Click to select an input from the Inputs list. To deselect the input, click on it again.
Only one input can be selected at a time. If the selected input is already routed to
one or more outputs, the outputs will be highlighted in orange, as shown below:

Gefen EXT-CU-LAN Specifications

General

Brand	Gefen
Model	EXT-CU-LAN
Category	Controller
Language	English