page | 74
Using Quick Presets
Quick presets can only be accessed from the IR remote control. For information on
creating quick presets, see Creating Quick Presets (page 70).
1. From any screen, press the desired quick preset from the Quick Presets section on
the IR remote control.
2. Press the desired quick preset button (1 - 8).
3. Once the quick preset has been applied,
the following screen will be displayed.
In the example, above, the bottom line reads “2
All Blu-Ray”. Here, “2” is the quick preset number
that was assigned to the user preset called “All
Blu-Ray”
4. The quick preset is now applied.
5. After a few moments, the previous screen which
was displayed, will be shown.
Basic OperationBasic Operation
Basic OperationBasic Operation
Using Presets
routing quick preset
2 all blu-ray
To Next Page
Loading...
Need help?
General