Gefen EXT-CU-LAN - Get_Ip_Mode

page | 179
Advanced Operation
Commands
#get_ip_mode
Returns the current IP mode of the specied port on the Matrix Controller.
Syntax
#get_ip_mode port
Parameters
port
Type: INTEGER
Accepts a number from the table below, specifying the desired port:
port Description
1
Control Port (LAN 1)
2
Video Port (LAN 2)
Example
#get_ip_mode 1
IP_MODE 1 DHCP
Related Commands
#get_gateway
#get_ip_address
#get_ipcong
#get_netmask
#get_web_port
#set_gateway
#set_ip_address
#set_ip_mode
#set_netmask
#set_port_mode
#set_web_port