page | 221
Appendix
Firmware Update Procedure
Updating Sender and Receiver Units
Up to 10 Sender and Receiver units can be updated, simultaneously, using the Matrix
Controller. This process can be performed automatically or manually. We will cover the
automatic method, rst.
► Automatic Method
1. Login to the web interface as Admin.
2. Click the I/O tab.
3. Click the desired Sender and/or Receiver units, to be updated, under the Inputs
and/or Outputs column. The selected units will be highlighted in red.
To select all Sender and Receiver units, click the Select All button.
To Next Page
Loading...
