page | 161
1 Enable Discovery
Click these buttons to enable or disable the Discovery feature. In order for
the Matrix Controller to be discovered on a network using Gefen Syner-G,
this feature must be enabled.
2 Find Your Device
Click this button to show the location of the device. When the Show Me
button is clicked, the button text will change to Hide Me and the follow-
ing buttons, highlighted in blue, will flash on the front panel of the Matrix
Controller:
Click the Hide Me button to stop the buttons from flashing.
Basic Operation
Web Interface
Network > Discovery
3
1
4
5
2
LAN
POE
5V DC
1 2
Matrix Controller
Status
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
To Next Page
Loading...
Need help?
General