page | 70
Creating Quick Presets
Each user or group preset can be assigned a quick preset. The quick preset provides
a one-button solution to accessing a user or group preset. The Matrix Controller provides
a total of eight quick presets, which can be used across all groups. Quick presets can be
split between multiple groups or they can be used within a single group. Quick presets can
only be created under the front panel user or a user with Slave access level. Quick presets
are accessed from the IR remote control.
1. Login to the web interface as front panel or as a user with Slave access level.
2. Click the Main tab.
3. Click the desired group button where the quick preset will be assigned.
4. Create a user or group preset but complete the following steps before saving the
preset. See Creating User Presets (page 63) or Creating Group Presets (page
66) for more information.
If a user or group preset already exists, see Editing Quick Presets (page 72) for
more information.
5. Click the Quick Presets drop-down list, next to the name of the preset and select the
desired preset (1 - 8). If this drop-down list is not shown, verify that you are logged in
as front panel.
Basic Operation
Basic Operation
Basic Operation
Basic Operation
Using Presets
To Next Page
Loading...
Need help?
General