Gefen EXT-CU-LAN - Set_Ip_Mode

page | 199
Commands
#set_ip_mode
Sets the IP mode fro the Control Network to either DHCP or Static. The Video Network IP
mode is set to Static and cannot be changed.
Syntax
#set_ip_mode port mode
Parameters
port
Type: INTEGER
Accepts a number from the table below, specifying the desired port.
port Description
1
Control Port (LAN 1)
2
Video Port (LAN 2)
mode
Type: INTEGER
Accepts a number from the table below, specifying the desired mode.
mode Description
0
Static
1
DHCP
Example
#set_ip_mode 1 1
IP_MODE 1 1
Related Commands
#get_gateway
#get_ip_address
#get_ip_mode
#get_ipcong
#get_netmask
#get_web_port
#set_gateway
#set_ip_address
#set_netmask
#set_port_mode
#set_web_port