Gefen EXT-CU-LAN User Manual

page | 53
Outputs to Inputs
1. Click the desired output(s) from the Output list. To deselect the output, click on it
again. If the output is already routed to an input, the input will be highlighted in red,
under the Inputs list.
2. Select the desired input, from the Inputs list. Only one input can be selected
at a time.
3. Select additional outputs, from under the Outputs list, as desired.
4. Click the Route button.
Basic Operation
Routing

Gefen EXT-CU-LAN Specifications

General

Brand	Gefen
Model	EXT-CU-LAN
Category	Controller
Language	English